How to Change Language in GIMP When Language Doesn't Change in GIMP or Problem with Adding Russian Language

  How to change the GIMP language? The GIMP language can be easily changed by opening the GIMP interface and going to edit menu > settings > interface > language and selecting the GIMP language to use in the interface before continuing to edit the image with simple features like drawing straight lines in GIMP‌ or more advanced features , such as batch resizing an image with GIMP. GIMP: change language in menu settings Below is a detailed guide on how to change the GIMP language. Change GIMP language detailed steps Start by opening the GIMP interface and going to the Edit menu, which will bring up the Settings submenu. How to change the GIMP language? : Setting submenu in edit menu Settings submenu in edit menu Then, after going to the GIMP settings, open the "Interface" screen, which contains the language option in the drop-down menu. How to change the GIMP language? : Language dropdown in interface settings menu Language drop-down in the interface settings menu In t...

Choosing a rod with the right features

 


Choosing a rod with the right features

Rod action


This often used concept means the temporal characteristic of the bending of the rod under load. If, after removing the load, the rod returns to its previous shape in a split second, this is a very fast action. When it straightens out over a longer period of time, it is a slower build. In the case when the entire whip is bent, it will take longer to restore its shape after removing the load. Rods in which the entire whip is bent, including the handle, are called parabolic.


Based on the name itself, it is clear that the action is how the rod is “built”, from what material, what is its geometric shape and linear dimensions.


The determining factors for the system are the physical properties of the material used - specific gravity, resistance to compression and stretching. A properly built rod, if a weight is attached to its tip, bends smoothly, without fractures, starting from the handle, if any. The bend should not be uniform along the entire length, but increasing from the butt to the top, without sharp fractures and without straight, rigid sections.